Simplifies installations that do not require a conduit, Class 2 outputs standard and may be wired directly to 115VAC input Provides continuous regulated and filtered 12VDC or 24VDC (80-800) Designed specifically to support electric locks and access control systems Provides individual fused protection, field reset On/Off switch allows for easy service and inspection Fire alarm input provides release of fail-safe locks in case of emergency Field selectable outputs Auto-resetting circuit protection Battery charging circuit, PTC protection LED system status indicator Class 2 outputs Heavy gauge enclosure, 18 ga Low battery disconnect when batteries are below 70% capacity Painted Beige Finish

Model SMP10 power supply converts low voltage AC input, to a 12VDC or 24VDC @ 10 amp of continuous supply current output. Dimensions (approximate): 7 x 4.25"W x 2.3"H Features 12VDC or 24VDC selectable output 10 amp continuous supply current Transformer requirements: - 28VAC/175VA for 12VDC @ 10 amp output (Altronix Model # T28140) - 28VAC/175VA for 24VDC @ 6 amp output (Altronix Model # T28140) - 28VAC/300VA for 24VDC @ 10 amp output (Altronix Model # T28300) Filtered and electronically regulated outputs Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup AC input and DC output LED... Less

The SM1BOE Signal Control Power Supply is designed to convert one (1) alarm input into six (6) siren outputs and one (1) strobe output. The SM1BOE also provides resetable panic output power and aux. power for motion sensors or accessories. Specifications: Input 115VAC / 60 Hz, 1.8 amps. Six (6) speaker outputs. Common speaker driving circuit (keeps speakers in phase). Six (6) alarm silence switches. One (1) alarm strobe output (2 amps max.). Isolated Trigger input. AC and Battery Fail LED indication. Trigger and Emergency LED indicator on front panel. Isolated trouble LED input 12VDC to 24VDC. Exterior speaker circuit breaker protection (PTC). Strobe output circuit breaker protection (PTC). Resetable 12VDC Panic Output. 12VDC auxiliary power output (2 amps max.). Four (4)... Less

Field Selectable Voltage 12VDC-5AMP or 24VDC-3AMP Filtered and Regulated DC Output Jumper Selectable Auto or Manual Reset (PDD-FT model only) Short Circuit Protection Low Battery Monitor and AC Fail Output Relay Modular Options Built-in Electrical Outlet (110 VAC) Auto Sensing AC Input (90-250 VAC) Fire Panel Interface with Switching Output Drop Down Lid Can be Used for a Work Surface "End of Line??? Resistor Supervision on Fire Interface Selectable Ground Fault Detection on Fire Interface Multi Panel Interconnect- Fire Disconnect External AC Power Indicator OPTIONS & ACCESSORIES Power Supply c/w Power Distribution Device-Fire Trigger 1-Output Power Distribution Device 8-Output Power Distribution Modules 4 & 8-Output (Fused or PTC-Auto Reset Breaker) ... Less

1, 4 or 8 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Input Voltage: 220VAC BPSH Operating Temperature: +32 to +105F [0 to +40C] Shipping Weights: BPSH-12-1, BPSH-24-1: 9 lbs. BPSH-12-3, BPSH-24-2: 15 lbs. BPSH-12-45 and BPSH-24-3: 18 lbs. BPSH-12-6 and BPSH-24-4: 24 lbs. BPSH-12-9 and BPSH-24-6: 28 lbs. BPSH-12-15 and BPSH-24-10: 33 lbs.

Class 2 Rated power limited output Universal 120 -240 VAC input Low voltage DC, regulated and filtered Single polarized connector for distribution board Fused primary input AC input and DC output monitoring circuits w/ LED indicators Cover mounted AC input indication NEMA 1 enclosure Hinged cover w/ lock down screws High voltage protective cover Options Emergency Interface Relay (FA) ??? Must be installed on distribution boards Battery Backup 2 relay QEL panic device control board 4 relay distribution board 4 relay distribution board with logic -Field configurable for: Time delay function Auto operator Security interlock 8 fused output distribution board 8 PTC output distribution board PS902... Less

Class 2 Rated power limited output Low voltage DC, regulated and filtered Two polarized connectors for distribution boards Fused primary input AC input and DC output monitoring circuit w/ LED indicators Cover mounted AC input indication NEMA 1 enclosure Hinged cover w/ lock down screws High voltage protective cover Options Emergency Interface Relay (FA) ??? Must be installed on distribution boards Battery Backup 2 relay QEL panic device control board 4 relay distribution board 4 relay distribution board with logic ??? Field configurable for: Time delay function Auto operator Security interlock 8 fused output distribution board 8 PTC output distribution board PS906 is able to accept a total... Less

Class 2 Rated power limited output Low voltage DC, regulated and filtered Two polarized connectors for distribution boards Fused primary input AC input and DC output monitoring circuit w/ LED indicators Cover mounted AC input indication NEMA 1 enclosure Hinged cover w/ lock down screws High voltage protective cover Options Emergency Interface Relay (FA) ??? Must be installed on distribution boards Battery Backup 2 relay QEL panic device control board 4 relay distribution board 4 relay distribution board with logic - Field configurable for: Time delay function Auto operator Security interlock 8 fused output distribution board 8 PTC output distribution board PS904 is able to accept a total of 2 optional distribution boards

2 amp Output @ 12 or 24 VDC (28 volt - 2.8 amp transformer) Totally protected circuitry. Built-in battery back-up charger Twin DC powered outputs. Fail-Safe fire alarm input. LED status indicators. Auxiliary alarm outputs. Consistent reliable operation. Quick easy installation. Alarm relay outputs.

12VDC or 24VDC selectable output. 4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output. Class 2 Rated power limited output. 115VAC 60Hz, 1.45 amp input. Filtered and electronically regulated outputs. Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type battery backup. Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators. AC fail supervision (form "C" contact rated @ 1 amp 28VDC). Low battery supervision (form "C" contact rated @ 1 amp 28VDC).

12VDC or 24VDC selectable output. 1.75 amp of continuous supply current. Two (2) PTC protected Class 2 Rated power limited outputs. 115VAC 60Hz, .6 amp. Filtered and electronically regulated outputs. Dry Trigger Input. Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type battery backup. Maximum charge current .4 amp. Automatic switch to stand-by battery when AC fails. AC fail supervision (form "C" contact rated @ 1 amp 28VDC). Dry trigger output supervision (form "C" contact rated @ 1 amp 28VDC). AC input and DC output LED indicators.

The Altronix ALTV1224-DC2 DC CCTV Power Supply is designed with sixteen (16) individually fused outputs for powering CCTV Cameras and other video accessories. It will provide 12 or 24 VDC distributed via sixteen (16) fuse output with a total of 6 amps continuous supply current. FEATURES: Input 115VAC 60Hz, 1.45 amps. Sixteen (16) individually fused outputs. 6 amps continuous supply current. Output fuses are rated at 3.5 amps / 250VAC. Main fuses are rated at 5 amps / 250VAC. Switch selectable 12VDC or 24VDC outputs. Filtered and electronically regulated outputs. AC input and DC output LED indicator. Power ON/OFF switch. Surge protection. Spare fuses included. Ease of installation saves time and eliminates costly labor. Unit maintains camera synchronization... Less

1 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Operating Temperature: +32 to +105F [0 to +40C]

8 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Operating Temperature: +32 to +105F [0 to +40C]

8 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Operating Temperature: +32 to +105F [0 to +40C]

8 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Operating Temperature: +32 to +105F [0 to +40C]

8 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Operating Temperature: +32 to +105F [0 to +40C]

8 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Operating Temperature: +32 to +105F [0 to +40C]

4 polyswitch (PTC) 2A circuit breakers based on model LEDs monitor zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1 Amp) Sealed lead acid-gel battery charging capability (battery not included) Rugged steel enclosure Provided with terminals for fire alarm relay connection, allowing release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components Operating Temperature: +32 to +105F [0 to +40C]

The LPS3 Linear Power Supply / Charger will convert a low voltage AC input to a low voltage 12/24VDC output. This power supply is specifically designed to provide to power needed by the most demanding security and access control applications. Specifications: Field selectable 12/24VDC power limited output. 2.5 amps continuous supply current. Filtered and electronically regulated output. Built-in charger for sealed lead acid or gel type batteries. Maximum charge current 500mA. Automatic switch over to stand-by battery. AC input and DC output LED indicators. Over voltage protection. Thermal overload and short circuit protection. Fused battery protection (circuit breaker available). Efficient switch mode design. Includes battery leads. Board Dimensions: 6.5L x 3.5W x 1.75H... Less

Dual output, field selectable 12 or 24VDC via clearly marked toggle switch Supplies 1 full AMP continuous current output, even while charging back-up batteries SPDT AC monitoring output allows for remote monitoring of the power supply's 110VAC input Separate voltage inputs for load and battery allow the batteries to charge at a higher output while the load remains at exactly 12 or 24VDC LED indication (AC & DC) showing power supply status UL Listed low current fire alarm disconnect requires only a minimum size fire alarm relay and wire gauge Polyswitch 2A breaker allow for large short duration inrush current if batteries are installed (approximately 20A for 1 second) Line voltage and DC fuses Sealed lead acid-gel battery charging capability (battery not included)

Dual output, field selectable 12 or 24VDC via clearly marked toggle switch Supplies 1 full AMP continuous current output, even while charging back-up batteries SPDT AC monitoring output allows for remote monitoring of the power supply's 110VAC input Separate voltage inputs for load and battery allow the batteries to charge at a higher output while the load remains at exactly 12 or 24VDC LED indication (AC & DC) showing power supply status UL Listed low current fire alarm disconnect requires only a minimum size fire alarm relay and wire gauge Polyswitch 2A breaker allow for large short duration inrush current if batteries are installed (approximately 20A for 1 second) Line voltage and DC fuses Sealed lead acid-gel battery charging capability (battery not included)

2MCCTV 2M-8716BKT-1 Weather Proof Day & Night 16 Infrared Bullet Camera DVR Standalone Kit 2MCCTV has bundled together in an economical kit that includes CCTV central power supply, weather proof day & night infrared bullet cameras, a sixteen channel standalone digital video recorder DVR, and cables and connectors to wire everything together. This kit is great for indoor/outdoor, home, or commercial surveillance. This 16 Channel Security Camera Kit includes: 2MCCTV 2M-DVR8716 H.264 16 Channel Digital Video Recorder DVR Features: H.264 Video Compression VGA Output Resolution is 1280 x 1024 Up to 16 Channels CIF Real-Time Recording and Playback at the Same Time Support D1 Real-Time Recording Support Built-in DDNS Domain Name Support Five OS for Mobile Surveillance Powerful CMS Support 16... Less

DPS1 power supply/charger converts low voltage AC input into 6VDC or 12VDC @ 1.2 amps or 24VDC @ 750mA of continuous supply current (see specifications). This general purpose power supply has a wide range of applications for access control, security and CCTV system accessories that require additional power. Specifications: Switch selectable 6VDC-12VDC-24VDC. 1.2 amp continuous supply current at 6VDC-12VDC. 750mA continuous supply current at 24VDC. Filtered and electronically regulated output. Built-in charger for sealed lead acid or gel type batteries. Maximum charge current 300mA. Automatic switchover to stand-by battery when AC Fails. Fused battery protection (circuit breakers available). Thermal and short circuit protection with auto reset. AC input and DC output LED... Less